6980240_orig.gif
Voted #6 by
200288696008704o.jpg
Signal Glorails Connector option
Install Information
Signal Glorails and RGB models
Here you can find information for any type of trailer adapter.
central-support.png
 
All Models can connect directly to the tail light (running lights slot) module easily.
This is the easiest and quickest way to install them - please see Images below. No messing with too many wires. Find the running lights wires and connect the controller's Positive and Negative wires to those two wires. The power source Connector's are reversible near the controller if your polarity is wrong and this goes for all existing Glorails models. You will be able to turn these off with your smart phone and it can be saved in the controller memory for your next power up setting. Alternatively we also use the tag light power source on most makes except for GMC or Chevrolet trucks. On these trucks the trailer hitch connector or tail light module are preferred.
With the signal Glorails how to install them is dependent on your personal preference like do you want them to come on when you turn your lights on or not. 
 
If you do not want them to come on automatically you will need to use a switch and or find a constant 12v supply and they will not be dependent on your existing lighting system
You can post questions by joining our Facebook Group located by clicking here
snapshot2a.jpg
screwdriver_PNG9522.png
snapshot3a.jpg
Z1KIttfo5oy.JPG
snapshota.jpg
7DDdyeq1.png
faq043_yy_500.jpg
faq043_ss_500.jpg
faq043_aa_600.jpg
faq043_xx_500.jpg
faq043_tt_500.jpg
US_4wayFlat.svg.png

X

X

 
 
Info we need from you
 
Modifying the PVC truck mount hole adapters
In some cases you will find that you will need to adjust or modify the hole adapters.
Because they are to big or you added a new truck accessory like side bed covers that may require you to make a modification to them. We use a cheap grinder to modify them  - please see Images below.
You can post questions by joining our Facebook Group located by clicking here
pvc2.jpg
PVC1.jpg
PVC elbow attachment directions1.jpg
GR_withPVC_red.jpg
Glorails Flat Mounts
In some cases you will find that you will need a flat mount adapter or some type of hybrid of both.
These can be used to mount our Glorails on any flat surface. Good for when you have a tool box or side bed covers. These would go under or on top of the side bed covers depending on your preferences  - please see Images below.
You can post questions by joining our Facebook Group located by clicking here
GR_Bottom_5_19th1.jpg
GR_Bottom2_Revised.jpg
GR_Bottom_7_20th.jpg
 
grlogotrans.png
 
Truck Mount Hole Info
truck info
 
 
Trimming 2 in Red Signal Glorails Tubes
Dscn1420.jpg
Dscn1422.jpg
Dscn1423.jpg